AR-15 Stocks

  • MBA-1 Rifle Buttstock

    $139.95 $131.55

    Product Description

    • Fully Adjustable Buttstock assembly to mount to a rifle (A2 Round Standard Tube)
    • Additional 1″ height on cheek rest
    • Additional 1 1/16″ length of pull with extended length buttplate
    • Approximately half the weight of competitors’ adjustable stocks The “MBA” weighs just 1.26 lbs.
    • Fits .223 and .308 AR style rifles
    • Super Strong Glass Filled Nylon
    • Comes with A1 Buttstock screw to connect to A2 standard buffer tube
    • Incorporates Castle Nut and Lock Ring in the design
    • Easy to replace and quick to install

    Features

    • Modular buttstock assembly for the AR
    • Interchangeable with standard A1 or A2 buttstocks or any aftermarket buttstock with overall length of approximately 10.5″
    • Fully Ambidextrous and can be comfortably used shooting off either shoulder (Cheek piece pre-installed for right handed shooters but can be installed on either side for right or left hand shooters)
    • Cheek piece not only moves up and down, it also moves back and forth on the stock
    • NOT interchangeable with carbine/collapsable rifles with telescoping assemblies (6-position tubes). You will need to purchase a MBA-3 or MBA-4 to fit these carbine tubes 

    Compatible Buffer Assemblies:

    • .223 Rifle Buffer Assembly (A2 Round Standard Tube)
    • .308 Rifle Buffer Assembly (A2 Round Standard Tube)
  • Product Description

    • Light weight stock to mount to a rifle (A2 Round Standard Tube)
    • Fits .223 and .308 AR style rifles
    • Super Strong Glass Filled Nylon
    • Comes with A2 Buttstock screw to connect to A2 standard buffer tube
    • Incorporates Castle Nut and Lock Ring in the design
    • 21st century look
    • Ergonomic
    • Easy to replace and quick to install

    Features

    • 0.7 lbs Buttstock for the AR
    • Easy to add a Luth-AR Cheek Piece: Cheek piece will add an additional 1″ height on cheek rest
    • Easy to add a Luth-AR Butt Plate Assembly or 3-Axis Butt Plate Assembly: The assemblies will add an additional 1 1/16″ length of pull with extended length buttplate
    • Interchangeable with standard A2 or A1 buttstocks or any aftermarket buttstock with overall length of approximately 10.5″
    • NOT interchangeable with carbine/collapsable rifles with telescoping assemblies (6-position tubes). You will need to purchase a MBA-3 or MBA-4 to fit these carbine tubes 

    Compatible Buffer Assemblies:

    • .223 Rifle Buffer Assembly
    • .308 Rifle Buffer Assembly
  • Product Description

    • Fully Adjustable Carbine Buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube)
    • Additional 1″ height on cheek rest
    • 3-axis Adjustable Butt Plate Assembly extends additional 1 1/16″ length of pull and includes the following movement:
      1. Horizontal for linear adjustment (i.e. length of pull)
      2. Vertical for a perfect butt plate fit into the curvature of the shoulder.
      3. Lateral adjustment for a ½ inch left or right cast
      4. This butt plate assembly is interchangeable with the original MBA-1 Buttstock
    • Includes a Picatinny Rail on the bottom rear of the Stock Body to attach your choice of many accessories.
    • Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. This also allows you to secure the stock in your favorite position.
    • The Black MBA-3 comes with a  medium soft rubber recoil pad, Duro 85.
    • The Luth-AR MBA-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
    • Fits all .223 and most .308 AR carbine style rifles
    • Super Strong Glass Filled Nylon
    • Easy to replace and quick to install
    • Uses 4 out of the 6 positions on a mil-spec or commercial tube

    Features

    • Ergonomic
    • Adapts To Existing Commercial and Mil-Spec Buffer Tubes
    • Certain after Market Commercial Buffer Tubes that exceed  1.172″ diameter, may not fit
    • The vertical struts for the MBA-3 are fixed, therefore the cheek piece is not reversible like the MBA-1 however the cheek piece itself is designed with a cheek pad for left-handed use
    • Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. See our MBA-1 and MBA-2 Rifle buttstocks as alternatives.
    • The MBA-3 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes 

    Compatible Buffer Assemblies:

    • .223 Mil-Spec Carbine Buffer Assembly
    • .223 Commercial Carbine Buffer Assembly
    • .308 Mil-Spec Carbine Buffer Assembly
    • .308 Commercial Carbine Buffer Assembly
  • Product Description

    • Light weight stock to mount to a carbine rifle  (6-positions mil-spec or commercial tube)
    • Fits all .223 and most .308 AR carbine style rifles
    • Super Strong Glass Filled Nylon
    • 21st century look
    • Ergonomic
    • Easy to replace and quick to install
    • Uses 4 out of the 6 positions on a mil-spec or commercial tube

    Features

    • Lightweight buttstock for the carbine AR, weighing in at 9.5 ounces
    • Easy to add a Luth-AR Cheek Piece: Cheek piece will add an additional 1″ height on cheek rest
    • Easy to add a Luth-AR Butt Plate Assembly or 3-Axis Butt Plate Assembly: The assemblies will add an additional 1 1/16″ length of pull with extended length buttplate
    • Adapts To Existing Commercial and Mil-Spec Buffer Tubes
    • Certain after Market Commercial Buffer Tubes that exceed 1.1172″ diameter may not fit
    • Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. See our MBA-1 and MBA-2 Rifle buttstocks as alternatives
    • The MBA-4 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes 

    Features

    • Picatinny Rail
    • Revolutionary Anti-Rattle Set Screw

    Compatible Buffer Assemblies:

    • .223 Mil-Spec Carbine Buffer Assembly
    • .223 Commercial Carbine Buffer Assembly
    • .308 Mil-Spec Carbine Buffer Assembly
    • .308 Commercial Carbine Buffer Assembly
  • Includes:
    • 1 Heavy Duty Push Button Swivel
    • 1 Threaded Cup
    • 1 Installation Tool
    Specs on the Swivel:
    • The Grovetec sling swivel will fit a 1 – 1 1/4 inch width sling.
    • The width of the oval loop on the sling swivel is 1 1/4 inch.